Site Admin Tech Assistance Call Shaina
(940) 284-5242

Dallas, Texas
NEW Owner / Manager
Site Admin. Technical Assistance Call Shaina (940) 284-5242
Dallas, Texas



Keywords:
Category: ALL (164 records) SOLD----THURSDAY NIGHT JULY 12TH 7PM RETIRED PHYSICIAN PERSONAL WOODWORKING CABINET & MACHINE SHOP ASSETS AND PERSONAL PROPERTY RELOCATION AUCTION COMMERCIAL & PROFESSIONAL GENTLY USED WOODWORKING SAWS, LATHES, ROUTERS, PLANERS, SANDERS, DUST COLLECTION SYSTEM AND MORE - July 12th 7pm 2 LOTS PER MIN 7:00 PM
Previous page Next page

Item Photo Description
A T_A.JPGThis auction STARTS TO CLOSE AT 7:00 PM (CST) at a rate of 1 lot per minute, starting at lot number 1.
B T_A.JPGThis auction features extended bidding. Any lot that gets a bid within two minutes of its Scheduled Closing Time will remain open for bids past its normal close, it will go into extended bidding. It will remain open until there are no bids on that lot for 2 minutes. This only effects lots with last minute bids, other lots will continue to close at their normal times.
C T_A.JPGThere will be a time remaining clock next to each lot. This displays the time remaining before that lot is scheduled to close if there is not extended bidding. YOU MUST REFRESH THE SCREEN TO KEEP THAT TIME ACCURATE. To refresh, simply click on the refresh word below the clock.
1 s001.JPGDUST COLLECTOR WOODTECH 3 HP 115/230VOLT 34/17AMPS SINGLE PHASE 3450 RPM 6" INLET 4" BRANCHES GENTLY USED APPROX 50 HOURS OR LESS OF USE
2 s002.JPGGALVANIZED STEEL 8" DIAMETER DUST DUCTS ABOUT 100 LINEAR FEET GALVANIZED STEEL 6" DIAMETER DUST DUCTS ABOUT 45 LINEAR FEET
3 s003.JPGFLEXIBLE WIRE/PLASTIC TUBING 4" DIAMETER ABOUT 50 LINEAR FEET
4 s004.JPGALLUMINUM DUST GATES 4" DIAMETER APPROXIMATE NUMBER 16
5 s005.JPGMETAL SCREW CLAMPS APPROX NUMBER 25 FIT 4" PIPE
6 s006.JPGGARDEN TOOLS AS SHOWN
7 s007.JPGY PIPE ADAPTORS 4" ADAPTORS 4"/3"
8 s008.JPGFOLDING 12' ALLUMINUM LADDER
9 s009.JPGPAINT SPRAYER, BINKS, GRACO MAGNUM L7S 17 USED ONLY ONCE
10 s010.JPGSPRAY PAINT CANS , SOME FULL, SOME PARTIALLY EMPTY
11 s011.JPGMISC HARDWARE FOR HANGING ITEMS ON WALL
12 s012.JPGPOWER CUTTER PUSH STICKS AND PADS (11) AND FEATHER BOARDS(3)
13 s013.JPGCASTER WHEELS VARIOUS SIZES
14 s014.JPGTORCH KIT AS SHOWN
15 s015.JPGMASONRY TOOLS AS SHOWN
16 s016.JPGLOG CHAIN WITH HOOKS 12' LONG
17 s017.JPGPANEL TRANSPORT TROLLEY
18 s018.JPGCOME ALONG AS SHOWN
19 s019.JPGVARIOUS EXTENSION CORDS, INCLUDING 100'
20 s020.JPGHARDWOOD HAND PLANES (3)
21 s021.JPGWOOD CHISELS GENTLY USED IN GREAT SHAPE(10)
22 s022.JPG10" SAW BLADES (6) SAW TABLE INSERTS (2)
23 s023.JPGDADO SET: 2 BLADES SEVERAL 10" CHIPPERS, SHIMS; ADJUSTABLE DADO BLADE 10IN
24 s024.JPGPOWERMATIC TENONING JIG #6284600
25 s025.JPGSTEEL SAW HORSES COLLAPSIBLE
26 s026.JPGROLLER TABLE, COLLAPSIBLE, ADJUSTABLE HEIGHT, 67" LONG X 24" W
27 s027.JPGLASER LEVEL ON TRIPOD, SELF LEVELING URBAN GORILLA TOOLS, MODEL 557 GENTLY USED IN GREAT SHAPE
28 s028.JPGWOOD TURNING LATHE, GENERAL 12", ELECTRONIC CONTROLS SWING OVER BED, 12"; SWING OVER BED GAP 16.5"; GENTLY USED WELL MAINTAINED 50 HOURS OR LESS BOUGHT NEW BY THIS DOCTOR FOR HIS PERSONAL SHOP DISTANCE BETWEEN CENTERS 38"; BED LENGTH 58"; VARIABLE SPEED 390 TO 3250 RPM; INBOARD SPINDLE THREADS 1-1/4"-8;OUTBOARD SPINDLE THREADS 1-1/8-8; OVERALL LENGTH 63"; HEIGHT SPINDLE TO FLOOR 41"; HEADSTOCK AND TAILSTOCK TAPER NO.2 M.T. EST. SHIPPING WEIGHT 610#
29 s029.JPGSORBY WOOD HANDLED LATHE CUTTING CHISELS AND SCRAPERS
30 s030.JPGKELTON TURNING SYSTEM KELTON TURNING ATTACHMENT KELTON HANDLES HEAVY DUTY HANDLES (2) KELTON HEAVY DUTY CHANGEABLE CUTTING CHISELS (3) KELTON CURVED CUTTERS AND SCRAPERS(9)
31 s031.JPGCALIPERS(8) CENTER FINDER
32 s032.JPGSCROLL CHUCK FOR BOWL TURNING, DRILL CHUCK, STRAIGHT, 90 DEGREE AND, CURVED TOOL RESTS
33 s033.JPGPOWERMATIC 66 10" TILTING ARBOR SAW ,+ EXTENDED TABLE FIXED ON RIGHT STEEL MOBILE BASE LAGUNA SLIDING GENTLY USED WELL MAINTAINED 50 HOURS OR LESS BOUGHT NEW BOUGHT BY THIS DOCTOR FOR HIS PERSONAL SHOP LIKE NEW CONDITION TABLE EXTENSION 16" ON LEFT, ADJUSTABLE CUTTING ANGLES POWERMATIC ACCU-FENCE SOMMERVILLE DESIGN, EXCALIBUR DUST COLLECTOR "OVER THE BLADE" MODEL EXBC OUTFEED ROLLER ASSEMBLY, COLLAPSIBLE SPLITTER AND GUARD MITER BAR THE SAW WAS $2000.00 THE ATTACHMENT WAS $945.00 AND OVER THE BLADE DUST COLLECTOR WAS $500.00 TOTAL INVESTMENT COST OVER $3500.00
34 s034.JPGINCRA MITER 3000, MICROADJUSTABLE MITER BAR
35 s035.JPGWOODHAVEN MODEL #4958 TAPER MASTER, FOR TAPER CUTTING
36 s036.JPGHYDRAULIC SCISSORS LIFT TABLE 4'X4' TOP
37 s037.JPGBANDSAW, LAGUNA 16", MODEL LT16, BLADE LENGTH 144", MAX. WIDTH 1.25" 220 V, SINGLE PHASE, 60HZ, 2.2 KW, 15.1 WELL MAINTAINED GENTLY USED 50 HOURS OR LESS BOUGHT NEW BY DOCTOR FOR PERSONAL USEAMP THREE WHEEL PORTABILITY, 2 EXTRA BLADES NARROW, RUSTED
38 s038.JPGDRIFTMASTER ATTACHMENT FOR LAGUNA SAW (RUSTED THREADS)
39 s039.JPGHITACHI PNEUMATIC NAILERMM, 16 GUGE NAILS VARIOUS LENGTH
40 s040.JPGBRAD NAILER, PNEUMATIC, PORTER CABLE, 18 GAUGE NAILS
41 s041.JPGDEWALT AM/FM RADIO
42 s42.JPGBIESEMEYER MITER SAW TABLE SYSTEM FOR 12" SAW, (saw not included) TWO EIGHT FOOT SECTIONS, MODEL 79-808 MODIFIED CUT OFF GENTLY USED 50 HOURS OR LESS BOUGHT NEW BY DOCTOR FOR PERSONAL USE DOESNT INCLUDE SAWSTOPS: 78-989, DUALPOINTER OUTSIDE CUT OFF STOP,78-990; DUAL POINTER INSIDE CUT OFF STOPS these are on lot 159 (this lot includes the box ontop and cabinets underneath
43 s043.JPGDRILL PRESS VARIABLE SPEED, JET JDPMF/14MF/17MF SWING 14"; DRILL CAPACITY 5/8"; CHUCK SIZE 5/8"; SPINDLE TRAVEL 4-3/8"; SPINDLE TO BASE DISTANCE 49" SPINDLE TO STEEL TABLE MAX 29-1/8"; SPINDLE TAPER MT-2; COLUMN DIAMETER 3-1/8"; SPINDLE SPEEDS 16; RANGE OF SPINDLE SPEEDS 200-3,630RPM' OVERALL HERIGHT 66"; MOTOR 3/4HP, 1PH, 115/230V; WT 167# 3 CASTER STEEL PORTABILITY BASE
44 s044.JPGWOODHAVEN MODEL #1835 TILT BASE AND #1825 DRILL PRESS TABLE AND #1850 DRILL PRESS FENCE MUST BE UNCLAMPED FROM PRESS INCLUDES CLAMPS
45 s045.JPG66" CRANK ON PIPE(2); 42" CRANK ON PIPE (2)
46 s046.JPG8' BAR CLAMP(1) 50" BAR CLAMPS(4)
47 s047.JPG25" BAR CLAMPS AS SHOWN
48 s048.JPGPINCH CLAMPS, MEDIUM(8), PINCH CLAMPS SMALL(12), METAL C CLAMPS(13)
49 s049.JPGCORNER SQUARES(4); FABRIC ON ROLLER
50 s050.JPGCORNER CLAMPS AS SHOWN
51 s051.JPGHEAVY C CLAMP, 16", 6' THROAT DEPTH
52 s052.JPGMEDIUM C CLAMPS, 12", 6" THROAT DEPTH
53 s053.JPGMEDIUM C CLAMPS, 8", 4" THROAT DEPTH
54 s054.JPGPINCH CLAMPS, EXTRA LARGE
55 s055.JPGEDGE CLAMPS AS SHOWN
56 s056.JPGLIGHT C CLAMPS 12",2" THROAT DEPTH
57 s057.JPGLIGHT C CLAMPS 6", 2" THROAT DEPTH
58 s058.JPGQUICK CLAMPS AS SHOWN
59 s059.JPGQUICK GRAB MEDIUM 6"(2); 10"(2)
60 s060.JPGCRANK ON PIPE 36"; 24"; QUICK GRAB 48", 24"
61 s061.JPGSPIRIT LEVEL, 6' LONG
62 s062.JPGLIMBER ON SOUTH WALL
63 s063.JPGWORK BENCH, ULIMA, HARD BEECHWOOD,SIDE AND END VISES 5.5" AND 10" JAWS RESPECTIVELY REAR TRAY, BOTTOM SHELF AND POWER STRIP ADDED 84" LX 30" W (INCLUDING TRAY) X 36 H
64 s064.JPGSTEEL LUMBER RACKS FOR WALL ATTACHMENT
65 s065.JPGASSORTED SCREWS AND NAILS
66 s066.JPGASSORTED SANDING AND FINISHING MATERIALS INCLUDING DRUM SANDERS FOR DRILL PRESS
67 s067.JPGASSORTED DRILL BITS, WOOD
68 s068.JPGASSORTED DRILL BITS, MASONRY
69 s069.JPGMORTISING BITS(3) 1/2", 3/8" AND 1/4"
70 s070.JPGCOUNTER SINK SET; SCRAPER HOLDER, DRILL GUIDE KIT
71 s071.JPGSANDING CENTER, 6 "BELT/12" DISC, DELTA MODEL 31-280; 115V/230V 3 CASTER STEEL PORTABILITY BASE, DUST COLLECTOR HOOD GENTLY USED 50 HOURS OR LESS BOUGHT NEW BY DOCTOR FOR PERSONAL USE
72 s072.JPG12" SANDPAPER DISCS FOR DELTA 31-280


Select page to view:
p1

Home - Auctions - About Us - Partners - Register - Contact Us
 
Texas Resale Certificate - Texas Sales and Use Tax Exemption Certification - Terms & Conditions
 
All content copyright © 2002-2019 World Wide Auction Co. - Website by WWAC INC.


© Copyright, 2017 World Wide Auction Group