Site Admin Tech Assistance Call Shaina
(940) 284-5242

Dallas, Texas
Auctioneer / Manager Phillip Hodges(972)786-4654
Site Admin. Technical Assistance Call Shaina (940) 284-5242
Dallas, Texas




World Wide Auction Inc Offices
SOLD----THURSDAY NIGHT JULY 12TH 7PM RETIRED PHYSICIAN PERSONAL WOODWORKING CABINET & MACHINE SHOP ASSETS AND PERSONAL PROPERTY RELOCATION AUCTION COMMERCIAL & PROFESSIONAL GENTLY USED WOODWORKING SAWS, LATHES, ROUTERS, PLANERS, SANDERS, DUST COLLECTION SYSTEM AND MORE - July 12th 7pm 2 LOTS PER MIN 7:00 PM

Item Description
A.This auction STARTS TO CLOSE AT 7:00 PM (CST) at a rate of 1 lot per minute, starting at lot number 1.
B.This auction features extended bidding. Any lot that gets a bid within two minutes of its Scheduled Closing Time will remain open for bids past its normal close, it will go into extended bidding. It will remain open until there are no bids on that lot for 2 minutes. This only effects lots with last minute bids, other lots will continue to close at their normal times.
C.There will be a time remaining clock next to each lot. This displays the time remaining before that lot is scheduled to close if there is not extended bidding. YOU MUST REFRESH THE SCREEN TO KEEP THAT TIME ACCURATE. To refresh, simply click on the refresh word below the clock.
1.DUST COLLECTOR WOODTECH 3 HP 115/230VOLT 34/17AMPS SINGLE PHASE 3450 RPM 6" INLET 4" BRANCHES GENTLY USED APPROX 50 HOURS OR LESS OF USE
2.GALVANIZED STEEL 8" DIAMETER DUST DUCTS ABOUT 100 LINEAR FEET GALVANIZED STEEL 6" DIAMETER DUST DUCTS ABOUT 45 LINEAR FEET
3.FLEXIBLE WIRE/PLASTIC TUBING 4" DIAMETER ABOUT 50 LINEAR FEET
4.ALLUMINUM DUST GATES 4" DIAMETER APPROXIMATE NUMBER 16
5.METAL SCREW CLAMPS APPROX NUMBER 25 FIT 4" PIPE
6.GARDEN TOOLS AS SHOWN
7.Y PIPE ADAPTORS 4" ADAPTORS 4"/3"
8.FOLDING 12' ALLUMINUM LADDER
9.PAINT SPRAYER, BINKS, GRACO MAGNUM L7S 17 USED ONLY ONCE
10.SPRAY PAINT CANS , SOME FULL, SOME PARTIALLY EMPTY
11.MISC HARDWARE FOR HANGING ITEMS ON WALL
12.POWER CUTTER PUSH STICKS AND PADS (11) AND FEATHER BOARDS(3)
13.CASTER WHEELS VARIOUS SIZES
14.TORCH KIT AS SHOWN
15.MASONRY TOOLS AS SHOWN
16.LOG CHAIN WITH HOOKS 12' LONG
17.PANEL TRANSPORT TROLLEY
18.COME ALONG AS SHOWN
19.VARIOUS EXTENSION CORDS, INCLUDING 100'
20.HARDWOOD HAND PLANES (3)
21.WOOD CHISELS GENTLY USED IN GREAT SHAPE(10)
22.10" SAW BLADES (6) SAW TABLE INSERTS (2)
23.DADO SET: 2 BLADES SEVERAL 10" CHIPPERS, SHIMS; ADJUSTABLE DADO BLADE 10IN
24.POWERMATIC TENONING JIG #6284600
25.STEEL SAW HORSES COLLAPSIBLE
26.ROLLER TABLE, COLLAPSIBLE, ADJUSTABLE HEIGHT, 67" LONG X 24" W
27.LASER LEVEL ON TRIPOD, SELF LEVELING URBAN GORILLA TOOLS, MODEL 557 GENTLY USED IN GREAT SHAPE
28.WOOD TURNING LATHE, GENERAL 12", ELECTRONIC CONTROLS SWING OVER BED, 12"; SWING OVER BED GAP 16.5"; GENTLY USED WELL MAINTAINED 50 HOURS OR LESS BOUGHT NEW BY THIS DOCTOR FOR HIS PERSONAL SHOP DISTANCE BETWEEN CENTERS 38"; BED LENGTH 58"; VARIABLE SPEED 390 TO 3250 RPM; INBOARD SPINDLE THREADS 1-1/4"-8;OUTBOARD SPINDLE THREADS 1-1/8-8; OVERALL LENGTH 63"; HEIGHT SPINDLE TO FLOOR 41"; HEADSTOCK AND TAILSTOCK TAPER NO.2 M.T. EST. SHIPPING WEIGHT 610#
29.SORBY WOOD HANDLED LATHE CUTTING CHISELS AND SCRAPERS
30.KELTON TURNING SYSTEM KELTON TURNING ATTACHMENT KELTON HANDLES HEAVY DUTY HANDLES (2) KELTON HEAVY DUTY CHANGEABLE CUTTING CHISELS (3) KELTON CURVED CUTTERS AND SCRAPERS(9)
31.CALIPERS(8) CENTER FINDER
32.SCROLL CHUCK FOR BOWL TURNING, DRILL CHUCK, STRAIGHT, 90 DEGREE AND, CURVED TOOL RESTS
33.POWERMATIC 66 10" TILTING ARBOR SAW ,+ EXTENDED TABLE FIXED ON RIGHT STEEL MOBILE BASE LAGUNA SLIDING GENTLY USED WELL MAINTAINED 50 HOURS OR LESS BOUGHT NEW BOUGHT BY THIS DOCTOR FOR HIS PERSONAL SHOP LIKE NEW CONDITION TABLE EXTENSION 16" ON LEFT, ADJUSTABLE CUTTING ANGLES POWERMATIC ACCU-FENCE SOMMERVILLE DESIGN, EXCALIBUR DUST COLLECTOR "OVER THE BLADE" MODEL EXBC OUTFEED ROLLER ASSEMBLY, COLLAPSIBLE SPLITTER AND GUARD MITER BAR THE SAW WAS $2000.00 THE ATTACHMENT WAS $945.00 AND OVER THE BLADE DUST COLLECTOR WAS $500.00 TOTAL INVESTMENT COST OVER $3500.00
34.INCRA MITER 3000, MICROADJUSTABLE MITER BAR
35.WOODHAVEN MODEL #4958 TAPER MASTER, FOR TAPER CUTTING
36.HYDRAULIC SCISSORS LIFT TABLE 4'X4' TOP
37.BANDSAW, LAGUNA 16", MODEL LT16, BLADE LENGTH 144", MAX. WIDTH 1.25" 220 V, SINGLE PHASE, 60HZ, 2.2 KW, 15.1 WELL MAINTAINED GENTLY USED 50 HOURS OR LESS BOUGHT NEW BY DOCTOR FOR PERSONAL USEAMP THREE WHEEL PORTABILITY, 2 EXTRA BLADES NARROW, RUSTED
38.DRIFTMASTER ATTACHMENT FOR LAGUNA SAW (RUSTED THREADS)
39.HITACHI PNEUMATIC NAILERMM, 16 GUGE NAILS VARIOUS LENGTH
40.BRAD NAILER, PNEUMATIC, PORTER CABLE, 18 GAUGE NAILS
41.DEWALT AM/FM RADIO
42.BIESEMEYER MITER SAW TABLE SYSTEM FOR 12" SAW, (saw not included) TWO EIGHT FOOT SECTIONS, MODEL 79-808 MODIFIED CUT OFF GENTLY USED 50 HOURS OR LESS BOUGHT NEW BY DOCTOR FOR PERSONAL USE DOESNT INCLUDE SAWSTOPS: 78-989, DUALPOINTER OUTSIDE CUT OFF STOP,78-990; DUAL POINTER INSIDE CUT OFF STOPS these are on lot 159 (this lot includes the box ontop and cabinets underneath
43.DRILL PRESS VARIABLE SPEED, JET JDPMF/14MF/17MF SWING 14"; DRILL CAPACITY 5/8"; CHUCK SIZE 5/8"; SPINDLE TRAVEL 4-3/8"; SPINDLE TO BASE DISTANCE 49" SPINDLE TO STEEL TABLE MAX 29-1/8"; SPINDLE TAPER MT-2; COLUMN DIAMETER 3-1/8"; SPINDLE SPEEDS 16; RANGE OF SPINDLE SPEEDS 200-3,630RPM' OVERALL HERIGHT 66"; MOTOR 3/4HP, 1PH, 115/230V; WT 167# 3 CASTER STEEL PORTABILITY BASE
44.WOODHAVEN MODEL #1835 TILT BASE AND #1825 DRILL PRESS TABLE AND #1850 DRILL PRESS FENCE MUST BE UNCLAMPED FROM PRESS INCLUDES CLAMPS
45.66" CRANK ON PIPE(2); 42" CRANK ON PIPE (2)
46.8' BAR CLAMP(1) 50" BAR CLAMPS(4)
47.25" BAR CLAMPS AS SHOWN
48.PINCH CLAMPS, MEDIUM(8), PINCH CLAMPS SMALL(12), METAL C CLAMPS(13)
49.CORNER SQUARES(4); FABRIC ON ROLLER
50.CORNER CLAMPS AS SHOWN
51.HEAVY C CLAMP, 16", 6' THROAT DEPTH
52.MEDIUM C CLAMPS, 12", 6" THROAT DEPTH
53.MEDIUM C CLAMPS, 8", 4" THROAT DEPTH
54.PINCH CLAMPS, EXTRA LARGE
55.EDGE CLAMPS AS SHOWN
56.LIGHT C CLAMPS 12",2" THROAT DEPTH
57.LIGHT C CLAMPS 6", 2" THROAT DEPTH
58.QUICK CLAMPS AS SHOWN
59.QUICK GRAB MEDIUM 6"(2); 10"(2)
60.CRANK ON PIPE 36"; 24"; QUICK GRAB 48", 24"
61.SPIRIT LEVEL, 6' LONG
62.LIMBER ON SOUTH WALL
63.WORK BENCH, ULIMA, HARD BEECHWOOD,SIDE AND END VISES 5.5" AND 10" JAWS RESPECTIVELY REAR TRAY, BOTTOM SHELF AND POWER STRIP ADDED 84" LX 30" W (INCLUDING TRAY) X 36 H
64.STEEL LUMBER RACKS FOR WALL ATTACHMENT
65.ASSORTED SCREWS AND NAILS
66.ASSORTED SANDING AND FINISHING MATERIALS INCLUDING DRUM SANDERS FOR DRILL PRESS
67.ASSORTED DRILL BITS, WOOD
68.ASSORTED DRILL BITS, MASONRY
69.MORTISING BITS(3) 1/2", 3/8" AND 1/4"
70.COUNTER SINK SET; SCRAPER HOLDER, DRILL GUIDE KIT
71.SANDING CENTER, 6 "BELT/12" DISC, DELTA MODEL 31-280; 115V/230V 3 CASTER STEEL PORTABILITY BASE, DUST COLLECTOR HOOD GENTLY USED 50 HOURS OR LESS BOUGHT NEW BY DOCTOR FOR PERSONAL USE
72.12" SANDPAPER DISCS FOR DELTA 31-280
73.SURFACE SANDER, WOODMASTER, MODEL 3875M, DRUM WIDTH 42", DRUM DIAMETER 8" DRUM MOTOR: 5HP, 230V ; PH-1; 30 AMP CIRCUIT. BELT TRANSPORT MOTOR 115VOLT, AMP CIRCUIT REVERSABLE AND VARIABLE SPEED TRANSPORT BELT 4 CASTER STEEL PORTABILITY CASE GENTLY USED 50 HOURS OR LESS BOUGHT NEW BY DOCTOR FOR PERSONAL USE
74.SANDPAPER ROLLS (5 FULL AND PART) FOR WOODMASTER 3875M
75.OSCILLATING SPINDLE SANDER JET JOVS-10 1725RPM;OSCILLATIONS/MINUTE 75; OSCILLATION LENGTH 1.5"; TABLE SIZE 24" X 24"; TABLE TILT 0-45. TABLE HEIGHT FROM FLOOR 37.4"; NET WEIGHT 301#; MOTOR 1HP, 115V, 1 PH VARYIOUS DIAMETER SANDING SPINDLES: 3/8" TO 4" DIAMTER (9), WRENCHES. PLATE INSERTS. GENTLY USED 50 HOURS OR LESS BOUGHT NEW BY DOCTOR FOR PERSONAL USE
76.JOINTER, JET, JJ-8CS, TABLE 9" X66-1/2"; 3 BLADES 8" LONG; FENCE 4" X 38-1/2"; FENCE TILT R & L 45 DEG. CUTTER SPEED 4500 RPM; MOTOR 2HP, 1PH, 230 V, WEIGHT 398 # EXTRA BLADES, ONE SET GENTLY USED 50 HOURS OR LESS BOUGHT NEW BY DOCTOR FOR PERSONAL USE
77.PLANER, JET, MODEL JWP-15CS CUTTING WIDTH 15"; MAX. THICKNESS 6", MIN. THICKNESS, 1/2", MIN. PLANING LENGTH, 8"; KNIVES, 3; CUTTERHEAD SPEED 4500 RPM; FEED RATE (F/MIN) 16 & 20; DUST CHUTE DIA., 4"; DIMENSONS 28.4"W X 41.4" H X 85 L (INCLUDES INFEED AND OUTFEED ROLLERS); MOTOR 3HP, 1PH, 230V; SHIPPING WT. 536# EXTRA BLADES, ONE SET, BLADE SETTER TOOLS GENTLY USED 50 HOURS OR LESS BOUGHT NEW BY DOCTOR FOR PERSONAL USE
78.DEWALT 10" COMPOUND MIXER SAW, HEAVY DUTY, DW703, TABLE INCLUDED GENTLY USED 50 HOURS OR LESS BOUGHT NEW BY DOCTOR FOR PERSONAL USE
79.GALVANIZED STEEL STANDS,
80.CAMPBELL HAUSFIELD COMPRESSOR GENTLY USED 50 HOURS OR LESS BOUGHT NEW BY DOCTOR FOR PERSONAL USE
81.STEEL SHEET GOODS RACKS FOR WALL ATTACHMENT TALL ENOUGH TO CLEAR 50" WIDTH
82.DOLLY, RUBBER TIRES
83.HYDRAULIC PALLATE JACK
84. ROUTERS AND ACCESSORIES (2) PORTER CABLE, MODEL 690, 2300RPM, 10AMP, 120V
85.PIPE WRENCH LARGE ; FILES; SAW; VARIOUS PUNCHES
86.ASSORTED LARGE BOLTS AND NUTS, LAG SCREWS
87.THREADED KNOBS AND 2 HOLD DOWN CLAMPS
88.SPRINGS, HINGES, MISC, HARDWARE
89.TORMEK WATER COOLED SHARPNER TORMEK JIGS, SUPPORTS
90.PORTER CABLE WOOD CHOP SAW, 7" BLADE
91.SKILLSAW, 120V
92.STEEL VISE
93.SOCKET SET, OVERSIZE, 3'4" DRIVE : SOCKETS 7/8"-2"; RATCHET HANDLE, T BAR, EXTENSIONS 4" AND 8"
94.METAL CHOP SAW WITH QUICK CHANGE CLAMP, DEWALT D28715, 120V MAXIMUM CUTTING CAPACITY AT 90 DEGREES; ROUND PIPE 5" DIAMETER; SQUARE TUBE, 4.7" PER SIDE; RECTANGULAR TUBE 4.5" X 6.5" TO 3" X 9"; L ANGLE 5.6" EACH SIDE
95.HYDRAULIC JACK GREAT SHAPE
96.PNEUMATIC HAMMER GREAT SHAPE
97.PNEUMATIC DRILL GREAT SHAPE
98.AIR WRENCH, SOCKETS
99.CRAFTSMAN 120V HAND DRILL
100.KREGG JOINER INCLUDING JIG, DRILL BIT, LONG SCREW DRIVER, MISC.PARTS
101.SCROLL SAW, DEWALT, VARIABLE SPEED, HEAVY DUTY, DW788; 120V
102.SANDPAPER CLEANER BOARD
103.PORTER CABLE PLUNGE ROUTER, VARIABLE SPEED. MODEL#7529, BASE MODEL # 75631, 12AMPS, 120V
104.ROUTER EDGE GUIDE
105.GRINDING DISCS,WIRE AND SANDPAPER CIRCULAR ABRASDERS FOR DRILL PRESS USE
106.REMOTE CONTROL SWITCH AND 2 REMOTE CONTROLS
107.PORTER CABLE PLATE JOINER. PC MODEL 557, 120V, 7.5AMP AT 10,000RPM, VARIABLE SPEED ASSORTED SIZE BISCUITS, EXTRA CUTTER WHEEL
108.PLUMBERS STEEL FISH TAPE 120'
109.PORTER CABLE 9.6V DRILL AND CHARGER, NO BATTERY; DEWALT 18V LIGHT, NO BATTERY
110.DRILL GUIDE, SAW EDGE HOLE CUTTERS
111.ROUTER, PORTER CABLE, 1/4' CHUCK MINI SIZE
112.ROTO ZIP MINI CUTTER
113.GLUE GUN, NUT DRIVERS, LINOLEUM KNIFE, GLASS PLAN GRIPPER, STUD FINDER
114.DEWALT RANDOM ORBITAL SANDER, LACKS PAD
115.ROUTER TABLE, CUSTOM MADE, 48" X 32" , 12 AMP PC ROUTER, JOINTECH SMART LIFT PRO ELEVATOR JOINTECH "CLINCHER MICRO ADJUSTABLE SMART FENCE"
116.ROUTER PLATES
117.TAPER CUTTING JIG, HOLE DRILLINNG GUIDE
118.ROUTER BITS DOVETAIL, PATTERN BOOK FOR JOINTECH FENCE.
119.PLASTIC RAIL INSERTS, ASSORTED DIAMETER TABLE INSERTS
120.ROUTER BITS , STANDARD DOORMARKER SET
121.ROUTER BITS, ROUND OVER SET
122.ROUTER BITS, BEARING, OGEE
123.ROUTER BITS, BEARING, CONCAVE
124.ROUTER BITS, CONVEX
125.ROUTER BITS, COMPLEX
126.ROUTER BITS, VARIOUS CURVES, BEARING
127.ROUTER BITS LARGE COMPLEX
128.ROUTER BITS LARGE COMPLEX
129.ROUTER BIT, BEARING
130.ROUTER BITS, VARIED
131.ROUTER BITS, ROUND CONCAVE
132.ROUTER BITS, VARIED
133.ROUTER BITS. SPIRAL (2), STRAIGHT (2)
134.ROUTER BITS, STRAIGHT
135.ROUTER BITS,SMALL STRAIGHT
136.ROUTER BITS, BEARING STRAIGHT
137.ROUTER BITS, PLYWOOD DIAMETER
138.ROUTER BITS, WOOTECH, 1/4" SHANK
139.ROUTER BITS, ADJUSTABLE DADO
140.BIESEMEYER CUT OFF STOPS. THIS LOT IS ATTACHMENTS FOR LOT 115. SOLD SEPARATELY
141.ROUTER ACCESSORIES: VERTICAL EXTENSIONS FOR RAIL, FEATHER BOARD THIS LOT IS ATTACHMENTS FOR LOT 115. SOLD SEPARATELY
142.HEAVY DUTY SHELVING STEEL FRAME SHELVING ON CASTERS 8'W X 24" DEEP X 80" HIGH
143.FILE CABINET 2 DRAWER
144.DRAFTING TABLE APPROX 3FT X 3 1/2FT X 4FT TALL
145.LARGE ROPE APPROX 50FT
146.BOOKS, VCR TAPES
147.PUSH BROOMS ASSORTED
148.PORTER CABLE (BALL BEARING PILOT) CARBIDE TIPPED 1/2 SHANK 45DEGREE BEVEL MODEL#V 43190
149.PORTER CABLE (BALL BEARING PILOT) CARBIDE TIPPED 1/2 SHANK OVERALL DIA.1-5/16" 5/8 CUT MODEL#43179
150.ASSORTED SIZED HAMMERS
151.ALI-GATOR-GRIT SANDPAPER HANDLE
152.IPOINT EVOLUTION ELEC. PENCIL SHARPNER
153.CRAFTSMAN AUTO SCROWLER SAW 3/4INCH STROKE MODEL # 315.17251 110-120V
154.PNEUMATIC TIRE CHUCK W PRESSURE GAUGE AND PRESSURE GAUGE
155.IMPACT SOCKET SET, AIR RACHETT 1/2 DRIVE IN CASE
156.ASSORTED TINS AND BOXES AS SHOWN
157.ASSORTED VINTAGE METAL BUCKETS
158.MAGNETIC MOUNTED MACHINE LIGHT WITH ADJUSTABLE HEAD
159.SAWSTOPS: 78-989, DUALPOINTER OUTSIDE CUT OFF STOP,78-990; DUAL POINTER INSIDE CUT OFF STOPS SOLD IN LOT 158
160.SHEET WOOD NEXT TO WALL AS SHOWN ASSORTED
161.SHEET WOOD WALL MOUNTED RACK

Home - Auctions - About Us - Partners - Register - Contact Us
 
Texas Resale Certificate - Texas Sales and Use Tax Exemption Certification - Terms & Conditions
 
All content copyright © 2002-2014 World Wide Auction Co. - Website by WWAC INC.


© Copyright, 2017 World Wide Auction Group